|
PowerGlaz® standard Photovoltaic (PV) modules use Romag’s extensive glass processing experience to produce high quality photovoltaic modules using the latest materials. Textured low iron glass is used as the outer component of the laminate to maximise the light transmission to the cells. The PV cells are connected in series and are encapsulated in EVA bonded to the glass sheet. A final layer of Tedlar is laminated to the rear of the module to complete the weather protection.
 
PowerGlaz® modules utilise 6inch (156mm x 156mm) cells. They are also available with either mono crystalline or polycrystalline cells. Our range of standard modules are all certified to IEC 61215 Edition 2 and IEC 61730.
PowerGlaz® standard modules provide excellent performance whether operating DC loads directly or in an inverter equipped system, AC loads. Enhanced efficiency polycrystalline or mono-crystalline silicon cells are connected in series and will charge 24-volt batteries efficiently in virtually any climate. With variants producing from 170Wp to 235Wp or more of nominal maximum power, PowerGlaz® modules are ideally suited to either utility grid-supplemental systems, or dedicated systems such as remote telecommunication stations, water pumping stations and land-based aids to navigation etc.
Microgeneration Certification Scheme (MCS)
From the 1st April 2010 Feed in Tariffs (FiT) will be introduced in the UK and and to qualify for FiT all modules must be MCS certified. PowerGlaz' SMT6 Serieis modules are MCS certified which means that they are truly 'Fit for FiT'.
Certification applies to the following modules:
PowerGLaz SMT 6(60)P
PowerGlaz SMT 6(54)P
PowerGlaz SMT 6(48)P
powerglaz_smt_6_datasheet.pdf
 
Module Types
PowerGlaz SMT 6 Series (6" Cells)
Test Certificate
ICIM_SMT6_Series_61215_61730.pdf
The PowerGlaz® range of standard modules is regularly updated and for our latest available options please contact Romag’s Sales department.
Warranty
Limited warranty for 80% power output for 25 years. Freedom from defects in materials and workmanship for 5 years.
Solar Farms
As well as being mounted onto buildings, PowerGlaz® standard modules are also installed into ‘solar farms’ or ‘solar fields’ and PowerGlaz® is installed for this application throughout Europe. These dedicated solar power stations require modules of optimum efficiency which may be installed onto devices which track the sun to generate maximum power output.PowerGlaz® modules utilise cells obtained from market leaders and we only use cells which fall into the higher efficiency bands. This means that PowerGlaz® modules may exceed the performance of most modules on the market.
PowerGlaz PV Kits
A range of PV kits are available which include all the components require for roof mounted or roof integrated systems including the PowerGLaz SMT6 Series standard modules, inverter(s), mounting system, AC and DC isolators and cables. For more information follow this link: pv_kit_brochure.pdf
The Choice is Yours
Romag’s philosophy has always been to ‘make what the customer wants’ and PowerGlaz® photovoltaic modules are no exception. Our ‘standard’ range of modules are reviewed regularly and are posted on our website which means that we may have modules available that will match your requirements but if not don’t be put off. contact us as we are happy to produce bespoke ‘glass/Tedlar’ modules to suit your individual requirements – don’t forget ‘THE CHOICE IS YOURS’.
|
